How To Install Surface Mount Ceiling Tiles

Written by US Indian on March 05 2023

How To Install Surface Mount Ceiling Tiles?

Surface mounted ceiling tiles are a great way to add a modern, stylish look to any room. Installing them is relatively easy if you have the right tools and supplies. This guide will walk you through the steps of installing surface mount ceiling tiles.

Before you begin the installation process, you will need to gather the following supplies:

Surface mount ceiling tiles
Screws and anchors
Drill and drill bits
Level
Tape measure

Once you have all the necessary supplies, you’re ready to begin the installation process. Here are the steps you need to take to complete the job:

Measure the area you’re installing the tiles in and mark the ceiling with a pencil. This will be your guide for the rest of the installation.
Using a drill and the appropriate drill bit, make small pilot holes in the ceiling for the screws and anchors. Make sure the holes are level.
Insert the screws and anchors into the pilot holes you just made, using a level to ensure they are straight.
Place the surface mount ceiling tiles onto the anchors and screws you just installed. Make sure the tiles are flush against the ceiling.
Secure the tiles with the screws provided. Make sure they are tight, but not so tight that they damage the tiles.
Repeat the above steps until all of your surface mount ceiling tiles are installed.

That’s all there is to it! Installing surface mounted ceiling tiles is a simple process that can be completed by most do-it-yourselfers. With the right tools and supplies, you can have a modern, stylish ceiling in no time.

CeilingMax Surface Mount Ceiling Grid Installation

How To Install Surface Mount Ceiling Tiles. This surface mount ceiling grid can be installed in any room. The grid system mounts to ceiling joists or any other ceiling surface and does not require wires or leveling. This grid system works with any 2'x2' or 2'x4' ceiling tile. Manufactured of easy-to-cut and use high-grade PVC, CeilingMax doesn't rust or show scratches. It saves up to 6" of ceiling height and is perfect for low-clearance basements. ...

Create 90-degree angles between the cross tracks (or tees) and the main tracks. The distance between the cross tracks should equal the length of the ceiling tiles.. The rows of tracks in the middle are installed 12" on centers. 1. Attach the track to the ceiling joists or the existing ceiling. 2. Snap on the clips. 3. Position the tile or plank by sliding. Armstrong Ceilings has a solution for you! Try our surface mount (direct apply) ceiling tiles or planks to create the perfect finishing touch. Install quickly and easily with our.